A bare uncovered metal overhead door is more susceptible to rust. So, it requires a coat of paint for protection from the natural elements. However, the paint will not only boost the life of your garage door, but also enhance the overall curb appeal of your home and the surrounding landscape. You can protect your metal door for many years by doing a good painting job, which is a very cost-effective way. So, follow some simple steps to successfully paint your metal door by yourself.
Here are some steps below ensuring that your metal garage door looks as if it were new.
Step 1: Soak your garage door with water
-
You can use a garden hose to spray and wash away debris, dust or grease from your metal door.
-
Then, spray a liquid cleansing agent and use a rough & scratchy sponge to scrub your door in circular motions. This is the most important step, so be sure to scrub the entire surface of the door (which includes base, corners, and sides) thoroughly. This type of scrubbing help in removing the stubborn and roughen the surface. So that coat of paint can adhere to it better.
-
You can use a sturdy step ladder to reach the top or the high corners of the door.
-
Lastly, before you proceed, make sure spray your metal garage door with water to wash away the cleansing agent and any residue and allow it to air dry thoroughly.
Step 2: Sand the metal overhead door
-
You should use a medium to heavy-grade sandpaper to sand your entire door.
-
It will help to rough-up the surface and ensure that the paint will stick to the door better.
-
Make sure to spread the newspapers to the base of the garage door to avoid any paint stains.
Step 3: Use primer
-
Primer is not that much important, but it helps the coat of paint adhere to the metal, and renders a smooth finish to your overall door.
-
You need to buy several cans of exterior metal spray primer, or you can also use a liquid form with a paintbrush.
-
Start applying an even coat of primer to the entire surface of your garage door including bolts, knobs and handles.
-
After that, leave your door for at least 10 to 12 hours to dry thoroughly.
Step 4: Apply coat of paint
-
Buy a can of your desired color of acrylic paint.
-
Then, dip a roller into it, and apply on the door from the top and moving downwards in straight lines.
-
You can use a contour brush to paint the edges and corners, and the areas where hard to reach.
-
After that, allow your door to dry thoroughly for 24 hours.
So start painting your metal garage door with a new coat of paint that will do wonders for your garage and your entire house.
We, https://www.promaster.ca/, provides the wide range of overhead door services including installation, parts sales, repair, maintenance and more across Canada. So, call today our highly professional technicians for immediate garage door assistance near your place.